Hang the PLA filament on the filament holder. Snapmaker 2.0 3D Printers support automatic and manual filament loading / unloading. When you finish calibrating, tap Save to save the changes. When the auto-leveling completes, you need to adjust the Z offset: Place the calibration card or a piece of paper under the nozzle, tap the Up and Down buttons to fine-tune the Z Offset until you feel a slight resistance when pulling out the paper, and see a fold when pushing forward. The 3D printing module will measure the distance between the nozzle and the heated bed at specific points. You can start it on the touchscreen by swiping left on the initial page to enter the main interface, tapping Calibration, and tapping START. Snapmaker 2.0 3D Printer features an Auto-leveling procedure. The calibration includes 2 steps: Leveling the Heated Bed and Setting the Z Offset. Each time you switch the machine from laser engraver or CNC carver to a 3D printer, or when there is poor adhesion for the first layer of the printing, you are suggested to recalibrate the heated bed. 2 3D Printing WorkflowĪ smooth and horizontal heated bed is of crucial importance in the printing quality.
Sketchup 8 print to scale how to#
You can also watch the video tutorials on our website ( ) to learn how to use the machine. Read the product Quick Start Guide ( ) to check the included parts, assemble the machine, and set up the machine for the first use.
0 kommentar(er)
